|
-
Commodity and Specifications:
Automatic Die cutting and Foil Stamping MachinewithHologram
Model : XMQ-1050FCH
C” Section( “c”stands for cross foil section)
Specifications for heating unit:
Number of heated zones
: 12
Temperature range
: 0-2000C
Power for heating
: 24 KW
Total power
: 44 KW
Specifications hot foil stamping unit:
Foil advancing shaft(each with a hologram
foil print mark reading photo sensor)
:4
Maximum capacity foil diameter
:Ø 200 mm
Foil core diameter
:1² or 3²
Maximum capacity rewind diameter (optional)
: Ø 200 mm
Maximum foil and stamping size
:730 x 1020 mm
Maximum foil stamping speed
(subject to paper, foil and stamping die quality as well as operator’s skill)
Foil pull length ＜ 200 mm Foil width ≥ 100 mm
:6000 sheets/h
Foil pull length ＜ 300 mm Foil width ≥ 100 mm
:5000 sheets/h
Foil pull length ＜ 600 mm Foil width = 150 mm
:4000 sheets/h
Foil pull length 600 - 700 mm Foil width = 150 mm
:3500 sheets/h
The max. mechanical speed is also 7500 Cycles/H
Maximum hologram foil stamping speed
(subject to paper, foil and stamping die quality as well as operator’s skill)
Foil pull length ≤ 100 mm Foil width ≥ 40 mm
: 5000 sheets/h
Foil pull length ≤ 300 mm Foil width ≥ 40 mm
: 4000 sheets/h
Foil pull length ≤ 500 mm Foil width ≥ 40 mm
: 3000 sheets/h
Hologram stamping accuracy
(subject to paper, foil and stamping die quality as well as operator’s skill)
: + 0.3 mm
Minimum foil width
:45mm
Number of heated zones
:12
Temperature range
:0-200°C
Power for heating
:24 KW
Specifications of paper stock range:
Maximum sheet size
: 1050 x 750 mm
Minimum sheet size
: 400 x 370 mm
Processable materials
1. Paper (depending on quality), min.
: 80 – 90 g/m2
2. Carton (depending on quality), up to
: 600 g/m2
3. Corrugated board (Fine), up to
: 4 mm
(*) Admissable undulation: 4% of the sheet width
Minimal gripper edge
: 9mm
Specifications for die cutting:
Maximum die cutting size
:1040 x 720 mm
Inner size of chase
:1145 x 755 mm
Dimensions die cutting plate
:1080 x 736 mm
Maximum die cutting pressure
: 300 T
Maximum mechanical speed
: 7500 cycles/hour
General specifications:
Power supply for main motor
: 11KW.
Power supply for other motors
: 9 KW
Total power supply including heating
: 63KW.
Power voltage
: 380V/3Phase/50Hz
Pile height feeder, maximum
: 1530 mm (incl. pallet)
Pile height feeder with Non-Stop operation, maximum
: 1130 mm (incl. pallet)
Pile height delivery, maximum
: 1300 mm (incl. pallet)
Pile height over Non-Stop curtain maximum
: 80 mm
Total length (incl. preloading rails)
: 7016 mm
Total width (incl. catwalk)
: 4049 mm
Total height (incl. raise 200 mm)
: 2167 mm
Total weight
: Approx. 17.5 ton
“C” SECTION SPECIFICATION
Max. Stamping Range
1020×600 mm (1020 in cross direction)
Max. Foil Width
600 mm
Max. Foil Advancing Step
600 mm
Foil Supply Bar Max. Capacity
Ø 200 mm
Min. Foil Width
25 mm
Foil Stamping System
1. Four servo motor driven foil advancing shafts each individually programmable for short and long foil stepping 99 programmable short pull per shaft
2. Each foil advancing shaft is equipped with a holographic foil print mark reading photo sensor.
3. Industrial PC holographic foil stamping to print register system with manual register tolerance compensation device.
4. Free standing operation console with industrial pc, Pro – Face touch screen and 12 thermometer for foil advancing step setting and temperature control with machine pre-heating timer
5. Draw type foil roll bracket for loading foil outside at operation side
6. Foil lead through bar
7. 450 turning bar
8. Foil splitting blade
9. Heating base with 12 heating zone each temperature adjustable individually
10. Foil breaking control
11. Warning system for remaining foil
12. Oil cooled tension control shaft
13. Foil separating air blaster with air volume, blasting strength per zone and starting and ending time adjustment
14. Thin paper stretching air blaster with air volume, blasting strength per zone and starting and ending time adjustment
15. A/C motor driven inverter controlled brush rollers waste foil ejecting and foil tension system
Optionals
Extra honeycomb plate
Extra 5 mm hardened cutting plate
Extra diechase
Free standing foil rewinding unit with 4rewinding shaft each two are controlled by one inverter for rewinding speed and foil tension control
View catalog pages
